Home/Adhesive Vinyl/LG 5510 Etched Glass Vinyl Sheets

LG 5510 Etched Glass Vinyl Sheets


(5 customer reviews)

LG 5510 is the #1 seller Etched Glass Vinyl in the USA. It is available in 4 colors with etched glass effect and four different sheet sizes. Custom sizes are available upon request.

We offer volume based pricing. See discounts

SKU: N/A Category:

LG 5510 Etched Glass Vinyl

LG 5510 is a high performance PVC film with a thickness of 3.5 mils. It is the ideal choice whenever an etched glass look is desired. It opens up many possibilities for adding a special touch to shop windows, glass doors and glass-like surfaces. The material has extreme weather resistance and UV stability. It also has a long service life of up to 5 years. The etched glass vinyl is perfect for drinkware, flower vases, mirrors, windows, glass block, picture frames and much more. It opens up unlimited design possibilities.

What makes these vinyl sheets even better is that they are suitable for all types of hobby and professional cutters. Silhouette Cameo, Cricut Maker and Explorer, ScanNCut, Roland.. the material has been made for them. The dense face film makes LG 5510 exceptionally easy to weed because the vinyl clings more tightly to the release liner. Even snap weeding is fast and easy. The repositionable adhesive means you can apply the vinyl on most surfaces dry without application fluid and lightly reposition it until it’s just right. Then apply pressure to activate the adhesive and finish the installation.

We recommend the use of an application tape for more complex projects featuring more than 1-2 symbols. At MilanSignSupply we prefer Oratape MT80P. It is reusable and perfect for the adhesive vinyl sheets we sell. This product is manufactured by LG Hausys – a worldwide leader in the vinyl industry. Please check the tabs above for Application instructions, cutter settings and product care. You can also read more about LG 5510 on lghausys.com.

How to apply LG 5510 Etched Glass Vinyl

LG 5510 is compatible with all hobby and professional cutters.

  • To start, cut the product using the appropriate setting on your cutter. You should do a “kiss cut” as you do not want to cut through the liner.
  • Place the vinyl on a table or hard surface with the liner down.
  • Weed away the excess material.
  • For precise positioning of multi letter or smaller symbols apply a transfer tape (MilanSignSupply sells Oratape MT80P which is reusable).
  • Lift away the decal from the liner using the transfer paper.
  • Place your graphic on a previously cleaned surface (rubbing alcohol works best).
  • Rub the vinyl and transfer tape on the surface (using our Oracal squeegee is recommended).
  • Slowly pull back the transfer tape at a 180 degree angle
  • If lifting of the vinyl occurs, lay the transfer tape back down and rub again.

*The inital bonding time of LG 5510 is 1 hour and the full bonding time is 24 hours. If you are having trouble with lifting allow your vinyl to rest for an hour before removing the transfer tape. Always clean your surface with alcohol before applying. Any oils will degrade the adhesive and will compromise the hold.

Please Note: The indicated cut settings are based upon tests believed to be reliable and true. Due to the varying conditions of every individual’s blade, cutting strip, cutting mat, and other accessories, the given values are only intended as a starting point. Therefore, they’re given without guarantee and do not constitute a warranty. The purchaser should independently determine their ideal cut settings through test cuts when using different materials or colors of a material.

The service life of this product is up 5 years for vertical outdoor exposure and a normal climate. If it is required to clean the vinyl after application, please use only water or soap water. If you have applied it on a car, please note that most of the chemicals used during machine wash can cause damage on the vinyl.

Environment and surface temperature must be at least +20 °C before these films can be removed. Using a knife, first lift up cautiously one corner of the film. Then slowly draw the film from the surface at a 180° angle. Heating the film with a hot-air gun while pulling makes removal considerably easier. If the film being removed is very old, a small amount of residue from the adhesive may remain on the surface. It can be removed easily with varnish thinner.

5 reviews for LG 5510 Etched Glass Vinyl Sheets

  1. Evelyn

    Great product for decorating!

  2. Layla

    Perfect <3

  3. Adalyn

    Great communication with the seller 🙂

  4. Zoe

    Very friendly seller.

  5. Harper

    Great quality!

Only logged in customers who have purchased this product may leave a review.