WE DELIVER WORLDWIDE
//Oracal 6510 Fluorescent Vinyl Sheets

Oracal 6510 Fluorescent Vinyl Sheets

$2.25

Rated 5.00 out of 5 based on 5 customer ratings
(5 customer reviews)

Oracal 6510 is the #1 Fluorescent Vinyl in the USA. It is available in 6 fluorescent colors with semi-gloss finish. We offer two sheet sizes. Custom sizes are available upon request.

We offer volume based pricing. See discounts

SKU: N/A Category:

Oracal 6510 Fluorescent Vinyl Sheets

Oracal 6510 is a fluorescent adhesive vinyl with unique characteristics. Featuring a permanent adhesive this vinyl is great for anything from a simple craft project to more complex decal and sign graphics. Its durability is 2 year for outdoor applications. It is perfect for information signs and fluorescent advertisements. It can be also used for sign boards, lettering, markings, symbols, stickers and graphic applications. An ideal choice when you need a minimal degree of reflectivity. Great for banners, signs, car/window decals, craft projects, water bottles, glassware, scrapbooking, & more! It is also ideal for bike and motor parts and helmets so everyone can see you at night.

What makes these fluorescent vinyl sheets even better is that they are suitable for all types of hobby and professional cutters. Silhouette Cameo, Cricut Maker and Explorer, ScanNCut, Roland and more. The dense face film makes Oracal 6510 exceptionally easy to weed because the vinyl clings more tightly to the release liner. Even snap weeding is fast and easy. The repositionable adhesive means you can apply the vinyl on most surfaces dry without application fluid and lightly reposition it until it’s just right. Then apply pressure to activate the adhesive and finish the installation.

We recommend the use of an application tape for more complex projects featuring more than 1-2 symbols. At MilanSignSupply we prefer Oratape MT80P. It is reusable and perfect for the adhesive Oracal vinyl sheets we sell. This product is manufactured by Orafol – a worldwide leader in the vinyl industry. Please check the tabs above for Application instructions, cutter settings and product care. You can also read more about Oracal 6510 on orafol.com.

How to apply Oracal 6510 Fluorescent Vinyl

Oracal 6510 is compatible with all hobby and professional cutters.

  • To start, cut the product using the appropriate setting on your cutter. You should do a “kiss cut” as you do not want to cut through the liner.
  • Place the vinyl on a table or hard surface with the liner down.
  • Weed away the excess material.
  • For precise positioning of multi letter or smaller symbols apply a transfer tape (MilanSignSupply sells Oratape MT80P which is reusable).
  • Lift away the decal from the liner using the transfer paper.
  • Place your graphic on a previously cleaned surface (rubbing alcohol works best).
  • Rub the vinyl and transfer tape on the surface (using our Oracal squeegee is recommended).
  • Slowly pull back the transfer tape at a 180 degree angle
  • If lifting of the vinyl occurs, lay the transfer tape back down and rub again.

*The inital bonding time of Oracal 6510 is 1 hour and the full bonding time is 24 hours. If you are having trouble with lifting allow your vinyl to rest for an hour before removing the transfer tape. Always clean your surface with alcohol before applying. Any oils will degrade the adhesive and will compromise the hold.

Please Note: The indicated cut settings are based upon tests believed to be reliable and true. Due to the varying conditions of every individual’s blade, cutting strip, cutting mat, and other accessories, the given values are only intended as a starting point. Therefore, they’re given without guarantee and do not constitute a warranty. The purchaser should independently determine their ideal cut settings through test cuts when using different materials or colors of a material.

Care
The service life of this product is up 2 years for vertical outdoor exposure and a normal climate. If it is required to clean the vinyl after application, please use only water or soap water. If you have applied it on a car, please note that most of the chemicals used during machine wash can cause damage on the vinyl.

Removal
Environment and surface temperature must be at least +20 °C before these films can be removed. Using a knife, first lift up cautiously one corner of the film. Then slowly draw the film from the surface at a 180° angle. Heating the film with a hot-air gun while pulling makes removal considerably easier. If the film being removed is very old, a small amount of residue from the adhesive may remain on the surface. It can be removed easily with varnish thinner.

5 reviews for Oracal 6510 Fluorescent Vinyl Sheets

  1. Rated 5 out of 5

    Ellie

    This is my second order from this shop and I’m super happy!

  2. Rated 5 out of 5

    Leah

    Just as ordered! We love it.

  3. Rated 5 out of 5

    Kinsley

    Great product and service

  4. Rated 5 out of 5

    Kaylee

    Great service, fast shipping & high quality products, thank you 🙂

  5. Rated 5 out of 5

    Madelyn

    Great product and easy to work with.

Add a review

Your email address will not be published. Required fields are marked *