Oralux 9300 is a unique cast self-adhesive vinyl that glows in the dark. It is available in light yellow color and 3 different sheet sizes. Custom sizes are available upon request.
We offer volume based pricing. See discounts
Oralux 9300 Glow in the Dark Vinyl Sheets
$2.49 – $3.65
Oralux 9300 Glow in the Dark Vinyl
Oralux 9300 is a luminescent (glow in the dark) self-adhesive vinyl. It looks great in the daylight and glows in the dark. The product is a white-yellow Cast-PVC vinyl with a glossy satin surface. When you expose the material to sunlight it charges itself. The more light it gathers, the more it glows in the dark. The afterglow effect is characterized by a lasting and very strong afterglow, once the active light source has been switched off. Moreover, you can repeat the process as often as required without impairing the phosphorescent properties of the film.
This glow in the dark vinyl is compatible with any professional vinyl cutter, Cricut or Silhouette machines. Oralux 9300 is ideal for the indoor marking of emergency exits and danger spots in buildings, cruise ships and airplanes. While this is the purpose it was developed for, it is also used for home decorations. Especially popular are children rooms where you can use the vinyl to create star and galaxy stickers. Just adhere to the sealing and create magical skies at night. Unlimited designs are possible to make your child feel safe and happy going to sleep.
Some great designs created with Oralux 9300 Glow in the Dark Vinyl:
Due to manufacturing and cutting process measurements are an approximate (+ or – .2 inches). The thickness of the material is 5.9 Mils. The adhesive of the material is solvent polyacrylate and is permanent while the durability is 5 years. The glow in the dark vinyl is cadmium-free and does not contain radioactive materials. It is absolutely safe for home use. This product is manufactured by Orafol – a worldwide leader in the vinyl industry. Please check the tabs above for Application instructions, cutter settings and product care. You can also read more about Oralux 9300 on orafol.com.
How to apply Oralux 9300 Glow Vinyl
Oralux 9300 is compatible with all hobby and professional cutters.
- To start, cut the product using the appropriate setting on your cutter. You should do a “kiss cut” as you do not want to cut through the liner.
- Place the vinyl on a table or hard surface with the liner down.
- Weed away the excess material.
- For precise positioning of multi letter or smaller symbols apply a transfer tape (MilanSignSupply sells Oratape MT80P which is reusable).
- Lift away the decal from the liner using the transfer paper.
- Place your graphic on a previously cleaned surface (rubbing alcohol works best).
- Rub the vinyl and transfer tape on the surface (using our Oracal squeegee is recommended).
- Slowly pull back the transfer tape at a 180 degree angle
- If lifting of the vinyl occurs, lay the transfer tape back down and rub again.
*The inital bonding time of Oralux 9300 is 1 hour and the full bonding time is 24 hours. If you are having trouble with lifting allow your vinyl to rest for an hour before removing the transfer tape. Always clean your surface with alcohol before applying. Any oils will degrade the adhesive and will compromise the hold.
Please Note: The indicated cut settings are based upon tests believed to be reliable and true. Due to the varying conditions of every individual’s blade, cutting strip, cutting mat, and other accessories, the given values are only intended as a starting point. Therefore, they’re given without guarantee and do not constitute a warranty. The purchaser should independently determine their ideal cut settings through test cuts when using different materials or colors of a material.
Care
The service life of this product is up 5 years for vertical outdoor exposure and a normal climate. If it is required to clean the vinyl after application, please use only water or soap water. If you have applied it on a car, please note that most of the chemicals used during machine wash can cause damage on the vinyl.
Removal
Environment and surface temperature must be at least +20 °C before these films can be removed. Using a knife, first lift up cautiously one corner of the film. Then slowly draw the film from the surface at a 180° angle. Heating the film with a hot-air gun while pulling makes removal considerably easier. If the film being removed is very old, a small amount of residue from the adhesive may remain on the surface. It can be removed easily with varnish thinner.
5 reviews for Oralux 9300 Glow in the Dark Vinyl Sheets
Only logged in customers who have purchased this product may leave a review.
Leah –
Just what I waned. Excellent communication and service. Reasonable shipping. Definitely would buy again from Milan!
Abigail –
arrived fast and just as described
Madison –
Amazing product. I made some gorgeous stars in my kids room and they go to sleep watching them every night.
Victoria –
Very please with the product, & fast shipping.
Luna –
Fast shipping and great quality vinyl.